PERFORMANCE
Working Time 15-25 minutes
Shelf stability (@ 75° F, minimum) 24 months
Hardness, Shore D Scale (full cure, 24 hours) 75
Lap shear tensile strength:
On steel (1” x 1” x 1/16”) 900 psi
On oak (1” x 1” x 1/16”) 500 psi
Compressive strength (p.s.i.) 2450 psi
Density (gm/cm3, lb/gal) .9, 7.5
Shrinkage <1%
Non-volatile content 100%
Electrical resistance (megohms) 30,000
Dielectric strength (volts/mil) 300
Upper temperature limit
Continuous 250° F
Intermittent 300° F
WOODWISE Epoxy Wood Patch is a fast-setting polymer compound that enables permanent repairs to wood. Each stick contains pre-measured portions of activator and base throughout — no measuring or mixing tools are necessary. The consistency (like modeling clay) allows the material to be shaped, formed and sculpted as needed before curing begins. Cured Epoxy Wood Patch has a hardness and density similar to wood. Once cured, it can be drilled, sawed, filed, carved, sanded, painted or stained.*
Resistant to water, chemicals and temperature extremes. Contains no solvents or VOC’s. It’s non-flammable and releases no noxious fumes. It won’t shrink, rot or pull away. The unused portion stays fresh for future use when saved in its original package.
Sold in 7″ (2-oz) lengths. Individually packaged in reusable, clear plastic tubes. Packed 12 tubes per carton.
*Accepts stain differently than surrounding wood. Always test for stain acceptance and color match before application. Dry pigments can be mixed in for tinting before application.